Login

Iván Oliva Arias

 

Investigador Cinvestav 3-C.
Doctor en Ciencias, CICESE, Ensenada, México(1994)
SNI Nivel 3

Teléfono: (999) 942 94 00 Ext. 9436
Correo: oliva@cinvestav.mx


Temas de investigación: Propiedades físicas de materiales metálicos y semiconductores en dimensiones nanométricas. Preparación y caracterización de capas delgadas semiconductoras por la técnica de baño químico. Instrumentación científica. Dispositivos térmicos y de energía solar.

 



Productividad Académica

 

Patentes

 

  1. Eduardo A. Huerta Argáez, José Emilio Corona Hernández, Andrés I. Oliva Arias y Francis Avilés Cetina. “Máquina Universal para medir propiedades mecánicas en materiales en película delgada”. 21 de Diciembre de 2010. (Patente registrada, IMPI, Folio: MX/E/2010/081503). Patente concedida: MX 341616 B (16 de Agosto de 2016)
  2. Fidel Fernando Gamboa Perera, Alejandro de Jesús López Puerto, Francis Avilés Cetina, José Emilio Corona Hernández, Andrés Iván Oliva Arias. “Método y aparato para obtener la frecuencia natural de vibración y el módulo elástico de multicapas con espesor nanométrico”. Expediente: MX/a/2014/013112, 28 de Octubre de 2014 (Patente registrada IMPI, Folio: MX/E/2014/077358). Patente concedida: MX 356742 B (05 de Junio de 2018)

Artículos

 

  1. R. Lopez, T. Diaz, G. García, E. Rosendo, R. Galeazzi, A. Coyopol, H. Juárez, M. Pacio, F. Morales, A.I. Oliva. “Fast formation of surface oxidized Zn nanorods and Urchin-like microclusters”.  Advances in Materials Science and Engineering. Volume 2014 (2014), Article ID 257494, (4 p). http://dx.doi.org/10.1155/2014/257494. ISSN: 1687-8434. J.S. Arellano, E. Rosendo, R. Romano, G. Nieto, T. Diaz, G. Garcia, H. Juarez, M. Pacio, R. Galeazzi, C. Morales, A.I. Oliva. “Synthesis and characterization of CdSe nanoparticles with cadmium precursor variation in colloidal synthesis”. Advanced Materials Research. 976 (2014) 52-58. ISSN: 978-3-03835-156-6. http://www.scientific.net/AMR.976.52.
  2. I.J. González-Panzo, P.E. Martin Várguez, A.I. Oliva. “Chemical conditions for the ZnS thin films preparation by chemical bath deposition”. Advanced Materials Research. 976 (2014) 103-107. ISSN: 1662-8985. http://www.scientific.net/AMR.976.103. ISSN: 978-3-03835-156-6.
  3. I.J. González-Panzo, P.E. Martín-Várguez, A.I. Oliva. “Physicochemical conditions for ZnS films deposited by chemical bath”. J. Electrochem. Soc. 161 (4) (2014) D181-D189. http://dx.doi.org/10.1149/2.067404jes. ISSN: 0013-4651.
  4. A.I. Oliva, J.E. Corona, R. Patiño, A. I Oliva-Avilés. “Chemical bath deposition of CdS thin films doped with Zn and Cu”. Bulletin of Materials Science. 37 (2) (2014) 247-255. http://dx.doi.org/10.1007/s12034-014-0642-9. ISSN: 0250-4707.
  5. A. López-Puerto, F. Avilés, F. Gamboa, A.I. Oliva. “A vibrational approach to determine the elastic modulus of individual thin films in multilayers”. Thin Solid Films. 565 (2014) pp. 228-236. ISSN: 0040-6090. http://dx.doi.org/10.1016/j.tsf.2014.06.024. ISSN: 0040-6090.
  6. I. J. González-Panzo, P. M. Martín-Várguez, A. I. Oliva. “Role of the thiourea on the rate of growth of chemical bath deposited ZnS films”. J. Electrochem. Soc. 161 (14) (2014) D761-D767. http://dx.doi.org/10.1149/2.0351414jes. ISSN: 0013-4651.
  7. J. M. Lugo, V. Rejón, A.I. Oliva. “Specific heat determination of metallic thin films at room conditions”. Journal of Heat Transfer (ASME). 137 (5) (2015) 051601 (11 p). http://dx.doi.org/10.1115/1.4029595. ISSN: 0022-1481.
    T.E. Novelo Moo, P. Amezaga-Madrid, R.D. Maldonado, A.I. Oliva, G.M. Alonzo-Medina. “Synthesis and characterization in AuCu-Si nanostructures”. Materials Characterization. 101 (2015) 83-89. http://dx.doi.org/10.1016/j.matchar.2015.01.010. ISSN: 1044-5803.
  8. J. Rojas, A.I. Oliva. “A double energy transition in nano crystalline CdxZn1-xS films by chemical bath”. Materials and Manufacturing Processes. 30 (2015) 785-792. http://dx.doi.org/10.1080/10426914.2014.994776. ISSN: 1042-6914.
  9. J. M. Lugo, C. Ayora, V. Rejón, A.I. Oliva. “Specific heat of Cu nano-films by using electrical micro-pulses at room conditions”. Thin Solid Films. 585 (2015) 24-30. ISSN: 0040-6090.
    http://dx.doi.org/10.1016/j.tsf.2015.03.067.
  10. J. A. Juárez-Moreno, A. Ávila-Ortega, A. I. Oliva, F. Avilés-Cetina,  J. V. Cauich-Rodríguez. “Effect of wettability and surface roughness on the adhesion properties of collagen on PDMS films treated by capacitively coupled oxygen plasma”. Applied Surface Science 349 (2015) 763-773. http://dx.doi.org/10.1016/j.apsusc.2015.05.063. ISSN: 0169-4332.
  11. R. Hernández, E. Rosendo, G. García, R. Romano-Trujillo, G. Nieto, A.I. Oliva, T. Díaz, C. Morales, H. Juárez, M. Pacio, R. Galeazzi. “Colloidal synthesis of ZnSe nanoparticles at room temperature”. Materials Letters. 159 (2015) 229-232.  http://dx.doi.org/10.1016/j.matlet.2015.06.092. ISSN: 0167-577X.
  12. A.I. Oliva, J.M. Lugo. “Measurement of the temperature coefficient of resistance in metallic films with nano-thickness”. International Journal of Thermophysics. 37 (2016) 35 (10 p). http://dx.doi.org/10.1007/s10765-016-2046-0. ISSN: 0195-928X.
  13. J.M. Lugo, A.I. Oliva. “Thermal properties of metallic films obtained at room conditions by the initial slope”. Journal of Thermophysics and Heat Transfer, 30 (2) (2016) 452-460. http://dx.doi.org/10.2514/1.T4605. ISSN: 0887-8722.
  14. M. Rosado-Mendoza, A.I. Oliva. “Chemical bath deposition of zinc sulfide doped with copper”. Materials & Manufacturing Processes. 31 (11) (2016) 1454-1460. http://dx.doi.org/10.1080/10426914.2016.1140185. ISSN: 1042-6914.
  15. F. Gamboa, A. López, F. Avilés, J. E Corona, A. I. Oliva. “A vibrating reed apparatus for measuring the natural frequency of multilayered thin films”. Measurement Science and Technology. 27 (4)(2016) 045002. http://dx.doi.org/10.1088/0957-0233/27/4/045002. ISSN: 0957-0233.
  16. A.I. Oliva, P.M. Martin-Várguez, I. J. González-Panzo, I. J. González-Chan. “Papel del diagrama de distribución de especies en la preparación de semiconductores por baño químico”. Rev. Mex. Ing. Quim., 15 (1) (2016) 209-220. ISSN: 2395-8472.
    http://www.rmiq.org/iqfvp/Pdfs/Vol.%2015,%20No.%201/Mat1/Mat1.html.
  17. I. J. González-Chan, A.I. Oliva. “Physicochemical analysis and characterization of chemical bath deposited ZnS films at near ambient temperature". Journal of The Electrochemical Society. 163 (8) (2016) D421-D427. http://dx.doi.org/10.1149/2.0911608jes. ISSN: 0013-4651.
  18. J. M. Lugo, A.I. Oliva. “Thermal diffusivity and thermal conductivity of copper thin films at ambient conditions”. Journal of Thermophysics and Heat Transfer. 30 (3) 481-489 (2016). http://dx.doi.org/10.2514/1.T4727. ISSN: 0887-8722.
  19. J. Sarmiento-Arellano, E. Rosendo, K. Vega, T. Díaz, Tomás; R. Romano, W. de la Cruz, R. Galeazzi, C. Morales, G. García, A.I. Oliva. “Influence of HCl concentration on the NPs-CdSe morphology prepared by colloidal method”. Journal of Applied Research and Technology. 14 (2016) 225-231. http://dx.doi.org/10.1016/j.jart.2016.05.008. ISSN: 1665-6423.
  20. M. Cen-Puc, G. Pool, F. Avilés, A. May-Pat, S. Flores, J. Lugo, G. Torres, L. Gus, A.I. Oliva, J.E. Corona. “A dedicated electric oven for characterization of thermo-resistive polymer nanocomposites”.
    Journal of Applied Research and Technology. 14 (2016) 268-277. ISSN: 1665-6423.
    http://dx.doi.org/10.1016/j.jart.2016.06.004.
  21. M. Moreno, G.M. Alonzo-Medina, A.I. Oliva, A.I. Oliva-Avilés. “Cadmium sulfide thin films deposited onto MWCNT/polysulfone substrates by chemical bath deposition". Advances in Materials Science and Engineering. Volume 216 (2016) Art. 2890717 (10 p). http://dx.doi.org/10.1155/2016/2890717. ISSN: 1687-8434.
  22. L.A. Can-Herrera, A. Ávila-Ortega, S. de la Rosa-García, A.I. Oliva, J.V. Cauich-Rodríguez, J. M. Cervantes-Uc. “Surface modification of electrospun polycaprolactone nanofibers by air plasma treatment: effect of plasma power and treatment time”. European Polymer Journal. 84 (2016) 502-513. http://dx.doi.org/10.1016/j.eurpolymj.2016.09.060. ISSN: 0014-3057.
  23. J.M. Lugo, A. I. Oliva. “Thermal effusivity determination of metallic films of nanometric thickness by the electrical micro-pulse method”. International Journal of Thermophysics. 38 (2) (2017) 18p. http://dx.doi.org/10.1007/s10765-016-2157-7. ISSN: 0195-928X.
  24. A.I. Oliva, J.M. Lugo, R.A. Gurubel, R. Centeno-Santana, J.E. Corona, F. Avilés. “Thermal coefficient of resistance and thermal expansion coefficient of 10-nm thick gold films”. Thin Solid Films. 623 (2017) 84-89.
    http://dx.doi.org/10.1016/j.tsf.2016.12.028. ISSN: 0040-6090.
  25. I.J. González-Chan, I.J. González-Panzo, A. I. Oliva. “Synthesis of ZnS thin films by chemical bath: from room temperature to 90°C”. Journal of The Electrochemical Society. 164 (2) (2017) D95-D103. http://dx.doi.org/10.1149/2.1371702jes. ISSN: 0013-4651.
  26. J.J. Espadas-Escalante, F. Avilés, P.I. González-Chí, A.I. Oliva. “Thermal conductivity and flammability of multiwall carbon nanotube/polyurethane foam composites”. Journal of Cellular Plastics, 53 (2) (2017) 215-230.
    http://dx.doi.org/10.1177/0021955X16644893. ISSN: 0021-955X.
  27. E. Camacho-Espinosa, V. Rejón, E.N. Hernández, Ricardo Mis, A.I. Oliva, E. Rosendo, Iván Rimmaudo, J. L. Peña. “CHClF2 gas mixtures to activate all-sputtered CdS/CdTe solar cells”. Solar Energy. 144 (2017) 729-734.
    http://dx.doi.org/10.1016/j.solener.2017.01.048. ISSN: 0038-092X.
  28. M. Rosado-Mendoza, A.I. Oliva-Avilés, A.I. Oliva. “Investigation of the selective growth of ZnO and Zn(OH)2 films deposited by chemical bath near room temperature”. JCS Journal of Solid State Science and Technology. 6 (7) (2017) N45-N53. http://dx.doi.org/10.1149/2.0051707jss. ISSN: 2162-8769.
  29. J.M. Juarez-Moreno, L. Brito-Argáez, A. Ávila-Ortega, A.I. Oliva, F. Avilés,  J.V. Cauich-Rodriguez. “Effect of the type of plasma on the polydimethylsiloxane/collagen composites adhesive properties”. International Journal of Adhesion and Adhesives. 77 (2017) 85-95.
    http://dx.doi.org/10.1016/j.ijadhadh.2017.03.010. ISSN: 0143-7496.
  30. E. Camacho-Espinosa, A.I. Oliva-Avilés, A.I. Oliva. “Effect of the substrate cleaning process on the pinholes formation in sputtered CdTe films”. Journal of Materials Engineering and Performance. 26 (2017) 4020-4028. http://dx.doi.org/10.1007/s11665-017-2842-0. ISSN: 1059-9495.
  31. M. Rosado-Mendoza, A.I. Oliva-Avilés, A.I. Oliva. “Preferential regions of growth of chemical bath deposited ZnO and Zn(OH)2 films at room conditions”. Thin Solid Films. 645(2018) 231-240. https://doi.org/10.1016/j.tsf.2017.10.050. ISSN: 0040-6090.
  32. J.R. Ramos, C. Morales, G. García, T. Díaz, E. Rosendo, J. Santoyo, A.I. Oliva, R. Galeazzi. “Optical and structural analysis of ZnS core-shell type nanowires”. Journal of Alloys and Compounds. 736 (2018) 93-98. https://doi.org/10.1016/j.jallcom.2017.11.087. ISSN: 0925-8388.
  33. J. Oliva, A.I. Martinez, A.I. Oliva, C.R. Garcia, A. Martínez-Luévanos, M. García-Lobato, R. Ochoa-Valiente, A. Verlanga. “Flexible graphene composites for removal of dye-contaminants from water". Applied Surface Science. 436 (2018) 739-746. https://doi.org/10.1016/j.apsusc.2017.12.084. ISSN: 0169-4332.
  34. G. Ojeda-Barrero, A.I. Oliva-Avilés, A.I. Oliva, R. D. Maldonado, M. Acosta. G.M. Alonzo-Medina. “Effect of the substrate temperature on the physical properties of sprayed-CdS films by using an automatized atomizer”. Materials Science in Semiconductor Processing, 79 (2018) 7-13.
    https://doi.org/10.1016/j.mssp.2018.01.018. ISSN: 1369-8001.
  35. R.H. Blas-Sevillano, T. Veramendi, B. La Torre, C.E. Velezmoro-Sánchez, A.I. Oliva, M.E. Mena-Martínez, W.A. Herrera-Kao, J.A. Uribe-Calderón, J.M. Cervantes-Uc. “Physicochemical characterization of several types of naturally colored cotton fibers from Peru”. Carbohydrate Polymers, 197 (2018) 246-252. https://doi.org/10.1016/j.carbpol.2018.06.006. ISSN: 0144-8617.